Home Company Info Product List Contact Details
Homeproduct Directory

SNB-series gloss ink for nylon bag cloth

SNB-series gloss ink for nylon bag cloth
company Zhongyi Ink & Paint Co., Ltd
Categories Ink Cartridges
Update2011-03-31
Original RegionChina
SNB-series gloss ink for nylon bag cloth
HomePRODUCTSSolvent-Based ink Nylon materials ink
SNB-series gloss ink for nylon bag cloth
Handbag, schoolbag, sports shoes and cap.
PRODUCT INFORMATION
Gloss ink, good printability and excellent adhension to bag cloth.
APPLICATION INFORMATION
MESH
Monofilament mesh, 60T-120T. 80T is recommended.
STENCIL
Using organic solvent resistant emulsions.
SQUEEGEE
65-85 durometer solvent resistant blade, such as PU.
COVERAGE
30 square meters per kilogram under 80T mesh.
PRINTING
This ink should be thinned with thinner approximately 10-20% by weight base on the climate condition.
Available solvent:
SU thinner.
783 (slow dry), 718/cycloheanone (medium dry) or 719 (fast dry).
When environment temperature is over 30or application on small printing area, slow and medium thinner should be selected. When environment temperature is below 20or application on large printing area, medium and fast thinner should be selected. Always mix well prior to each use.
DRYING
Drying by solvent evaporation. Surface dry needs 10-20 minutes, complete dry allows at least 24 hours.
(Drying time depends on actual weather condition and thinner usage)
CURE
Force to dry with hot dryer below 100is allowed.
CLEARS/EXTENDERS/ADDITIVES/CATALYST
Matt promoter(2-10%), anti-oxidizer(2-3%), 9004(2-8%), 9005, flexible additive(0.5-0.8%).
ADHESION TESTING
Adhesive tape test C use adhesive tape to stick on test surface and rip off, no ink should come off from test areas obviously.
CLEAN UP
Using organic solvent to clear the stencil.
PRODUCT RANGE AND PACKAGE
All of the colors are available in 1KG, 5KG and 20KG containers.
CAUTION
If 9004 or 9005 was added, the printing process should be finished not more than 8 hours. The stencils and blades should be thoroughly cleaned before process breaking.
Mischoice of the thinner may cause ink status damage.
Its the printers responsibility to pretest the ink selected prior to engaging in a production run. Allow at least 24 hours after test printing to evaluate the suitability of the ink and its adhesion to the surface. Before using, the printer shall determine the suitability of the product for its intended use.
BACKPREVIOUSNEXT[3]

SNB-series gloss ink for nylon bag cloth on sale

Products Showcase

See more products from this supplier.

Do you want to show products of your own company? Join FREE now!

You may also be interested in: